.32" IOF Revolver MK1

Oiling & Maintenance :

How to maintain 32 IOF Revolver

It is strongly recommended to clean and oil Barrel and Cylinder after firing even a single round. The other parts of the Arm require very slight attention. It is only necessary to remove dirt and oil from friction parts periodically. An excess of oil may affect the good functioning of the Arm. Suitable Lubricants for use under different temperature are listed below. For this purpose, dismantle Grip Right and Left and oil the components fitted underneath the grips in the body in assembled condition.

Parts/Area to be Lubricated	Approved Lubricant
All working parts in the Body and Cylinder	WonderX *Chexol 3 in 1 oil or similar thin light machine lubricating oil.
Barrel and Cylinder bore. when not in use(storage)	Thin film of lubricating oil as above in Cylinder and BArrel bore in addition to lubrication of moving parts.

**CHEXOL - 3 in 1 is marked by M/s. Geofrey Manners & Co. Ltd. Bombay.
*WONDER X M/s. Larson & Toubro Product.

Introduction	How to load a revolver	Now it is ready for firing	Safety
Parts detail sketch	General characteristics	Do's and Dont's	Back

Gunaccessory.Com, Cooper Road, Amritsar - 143001 (INDIA) Mob: +91- 98150 81823(9 A.M. - 8.00 P.M IST) (Manbir Singh) Tel: +91-183-2222 841 / 222 5316 (10A.M to 6.30 P.M IST)
	© Gunaccessory.Com All Rights Reserved.